Stainless steel bleed nipple with M7x1.0 thread.
These measure 16.5mm from the tip to under the hex. Approx 15mm the top of the thread.
Please note that these are the correct length to replace VW Part Number 113615273A.
These are the most common bleed nipples used on the T3 calipers.
However earlier models with ATE calipers used a longer bleed nipple, and whilst we have found that these will still seal when used with these calipers the head is very close to the caliper.
If you have early ATE calipers, or you are unsure please use the plated steel versions in related items below as they are longer and will suit all applications.