Fuel Hose / Mid Permeation - 2192
TYPE 2192 | |||||||
FUEL HOSE | |||||||
With mid-permeation, NBR inner, Textile Reinforcement, CR outer (abrasion resistance outer rubber layer) DIN 73379-2a (11/’97) | |||||||
DN (NW) | D1 ± 0,3 MM | D2 ± 0,6 MM | WORKING PRESSURE BAR | TESTING PRESSURE BAR | BURSTING PRESSURE BAR | SMALLEST BENDING RADIUS MM | PART NO |
2 | 3,2 | 8,5 | 6 | 20 | 30 | 45 | 2192.0209 |
3 | 4,5 | 10,5 | 6 | 20 | 30 | 50 | 2192.0310 |
4 | 6,0 | 12,0 | 6 | 20 | 30 | 60 | 2192.0400 |
6 | 7,5 | 13,5 | 6 | 20 | 30 | 70 | 2192.0600 |
6 | 7,0 | 13,0 | 6 | 20 | 30 | 70 | 2192.0613 |
8 | 9,5 | 15,5 | 6 | 20 | 30 | 80 | 2192.0800 |
10 | 12,0 | 19,0 | 6 | 20 | 30 | 80 | 2192.1000 |
13 | 14.0 ±0.4 | 22.0 ±0.7 | 6 | 20 | 30 | 100 | 2192.1300 |
16 | 17.0 ±0.4 | 24.0 ±0.4 | 6 | 20 | 30 | 125 | 2192.1600 |
Application | |||||||
Commercial fuels, especially super grade fuels up to a maximum of 50% benzol, hose is suitable for E10 petrol. | -30°C to +50°C | ||||||
Water, air, heating oil | -30°C to +90°C | ||||||
Diesel fuels (gas oil) with RME – addition | -30°C to +70°C |
This hose now replaces Cohline Type 2134.XXXX and 282.XXXX, please note the lower working pressure!
Cohline Type 2134.XXXX is now obsolete.
This hose is also available in limited dimensions with outer braiding.
2192.13 – Zinc plated steel outer braiding.
2192.01 – Stainless Steel outer braiding.
Available in 7.5mm, 9.5mm, 12mm, 14mm & 17mm ID
Please enquire for more details and lead times.
As with all hose they are supplied to us in 20m coils.
The maximum length available in one piece is 20m.
We will always try to supply hoses in one complete length.
Please note that only complete rolls can be returned, pieces cut from the roll cannot be returned for credit, Please ensure that you select the correct hose and length.